Home » Projects » Android on OMAP » Lists » omapandroid-discussion » Re: [Omapandroid-discussion] How to redirect output from onboardterminal emulator to the teraterm (Android Blaze) » omapandroid-discussion archives
|2011-06-22 07:22:31||Re: [Omapandroid-discussion] How to redirect output from onboardterminal emulator to the teraterm (Android Blaze)|
|Posted By: "Pradeep Gurumath" <firstname.lastname@example.org>|
Join Date: 2006-06-12
Location: UNITED STATES
|No, I need to redirect the output from the on-board terminal emulator (the
one that appears on the blaze screen) to either of serial consoles
thanks and regards,
----- Original Message -----
From: "Rangasamy, Devaraj"
To: "Quadros, Roger"
Sent: Wednesday, June 22, 2011 5:48 PM
Subject: RE: How to redirect output from onboard terminal emulator to the
teraterm (Android Blaze)
You can use cutecom/Mincom with ttyUSB2 with balze, and log the traces in
Android test automation page by Leed have lot of logging options
> -----Original Message-----
> From: Quadros, Roger
> Sent: Wednesday, June 22, 2011 5:44 PM
> To: Pradeep Gurumath
> Cc: email@example.com - OMAP Linux Baseport Development Team (May
> contain non-TIers); firstname.lastname@example.org
> Subject: Re: How to redirect output from onboard terminal emulator to the
> teraterm (Android Blaze)
> On 06/22/2011 03:09 PM, Pradeep Gurumath wrote:
> > Hi All,
> > As part of Test automation, I need to run certain commands from the
> > terminal emulator and want the output to be logged on to the teraterm.
> Do you mean you want to log everything that comes out of the ttyUSB from
> the platform?
> You could simply enable logging feature on teraterm, if it supports
> I know you can take save the serial console logs using minicom, not sure
> about teraterm.